You would remember from the last Post, you logged in to the GSPOS through the internal Wifi (GSDWIFI 2.4G) then Scanned the QR Code to GSD Driver System. Then you selected your name from the list and got the list of trains for the Session. We looked at the Train Order of the first train then opened the Train Details Screen to see the Timetable, The Loco and Brake Van Number and the Trains Location.
Part 6 Departing the Yard.
We found our train and checked off the Cars attached to ensure we had them all. We are ready to Depart.
Train 152 has been checked and is ready to depart.
You tap "Ready to Depart" . Once cleared by the Dispatcher and keeping an eye on the clock you depart For the next Stop. Note the App moves your train to the next stop on the screen, in this case Blue Lake.
Part 7. Shunting the First Stop
A few things to note, as the screen scrolls the 'Now At' Info and 'Train Number' are held at the top of the screen. Note also the Town Name Banner includes the Town Name and the Timetable data, so you can easily maintain a watch on the time. Note also the Car information shows where the car is to be spotted. Finally note the 'Shunt Completed' Button at the Bottom of the Town information.
You can see that two cars are to come off and 5 cars are to be put on. Once done Press "Shunt Completed"
A note here, you can mark each car as "Spotted" or "Mark on Train" OR you can leave that out and just tap "Shunt Complete" when all shunting is done, which will mark all cars either spotted or on the train.
But Reg, you ask, what if one car is not spotted or its left behind, don't worry, the system caters for that by reading your inputs. If a car in not spotted because the Siding is full or time prevents all work being done, just leave the car unchecked and move on.
Part 8 Moving On.
Wirrega Workload Screen
Part 9. Terminating a Train
You finish shunting the last stop on your journey and in accordance with the Timetable and Dispatchers clearance you head to the Yard where your train Terminates. In this case Mile End Yard.
The first screen shows what you screen will look like on arrival. The second screen shows what the screen will look like when the Button "Terminate" is tapped.
You make your way back to your Home Screen to check your next train and note Train 152 and 390 your first two trains are Greyed Out as they have finished.
Congratulations you have run your first Train using the GSPOS, just think how much carbon you have saved so we can reach Nett Zero.
The Commish







No comments:
Post a Comment